LABORATORY
Our company carries out all ISO 22241 tests with its Chemist and Environmental Engineer personnel.
For the continuity of product quality, tests are compared in Accredited and External laboratories. Every product shipped to our customers is shipped with a quality report, and our packaged products reach their end users with LOD numbering and QR code application. Within the scope of this systematic, witness samples from each production tank are kept for 1 year in order to objectively evaluate the situation of a complaint due to the dispatched products.
Our TS EN ISO / IEC 17025 Türkak Accreditation Process Continues.
Urea & Refractive Index Measurement
The urea value of the Adblue® product should be between 31.8% and 33.2% according to the ISO 22241-2 standard, and the refractive index value should be between 1.3814 and 1.3843 according to the ISO 22241-2 standard.
Determination of Trace Element Content
The content of trace elements (Al, Ca, Cr, Cu, Fe, K, Mg, Na, Ni, Zn) of the Adblue® product must comply with the ISO 22241-2 standard.
Density (Density) Measurement
The density value of the Adblue® product at 20 ° C should be between 1087 and 1093 kg / m3 according to the ISO 22241-2 standard.
Determination of aldehyde content
The aldehyde value of the Adblue® product should be in the range of 0 - 5 mg / kg according to the ISO 22241-2 standard.
Determination of biuret content
The biurea value of the Adblue® product should be in the range of 0 - 0.3% (m / m) according to the ISO 22241-2 standard.
Determination of insoluble matter content
The insoluble substance value of the Adblue® product should be in the range of 0 - 20 mg / kg according to the ISO 22241-2 standard.
Freezing Point Determination
Determination of the freezing point of Screenwash and Antifreeze is used to check whether products are diluted with water.
Boiling Point Determination
The boiling point is used for purity control of Glass Water and Antifreeze.
pH-Conductivity Determination
The pH Analyzer is used to check the acidity or alkalinity of the solution. Conductivity Determination is used to determine the ability of an aqueous solution to conduct electricity.